Waferlock Logo

Standalone Wall Readers

WR-1500 Standard Wall Reader
(Internal Application recommended)

Main Features

• Compact design
• Transponder: MIFARE® Classic (13.56Mhz)*
• Reading distance: up to 40mm
• LED indication
• Acoustic indication of card acceptance

Technical Specification

• Pre-wired with 3 metres of cable to controller
(Optional: 10 metres)
• Power: from WR-2104 Standalone controller
• Current draw: 100mA
• Environment:
IP55 (Recommended for internal installation only)
Operating Temperature -20°C to 70°C
• Reader dimension: 115mm x 32mm x 13mm
• Surface mount only
• Communication through RS485 to controller
• Firmware can be upgraded to change the wall reader
to work on our e-Link system with no hardware change

 

 

 
 
 


WR-1520 IP67 Rated Wall Reader
(External or Internal Application)

Main Features

• Metal Frame
• Supplied with a separate mounting plate for ease of install
• Transponder: MIFARE® Classic (13.56Mhz)*
• Reading distance: up to 25mm
• LED indication
• Acoustic indication of card acceptance

Technical Specification

• Pre-wired with 3 metres of cable to controller
(Optional: 10 metres)
• Power: from WR-2104 Standalone controller
• Current draw: 100mA
• Environment:
IP67
Operating Temperature -20°C to 70°C
• Reader dimension: 90mm x 90mm x 13mm
• Surface fix or mount on a standard UK flush back box
• Communication through RS485 to controller
• Firmware can be upgraded to change the wall reader
to work on our e-Link system with no hardware change

*MIFARE and MIFARE Classic are trademarks of NXP B.V